Ford

5.4 litre V8 (Boss Modular) Ford XR8 and FPV models BA – FG

Ford Eaton HTV200 Kit

Vehicle

Ford 5.4 litre V8 (Boss Modular) Ford XR8 and FPV models – BA – FG

Overview

This is the best bolt-on performance improvement available for the 5.4 Boss Modular V8 on the market. The package delivers exhilarating yet totally affordable supercharger performance, representing exceptional value and reliability. The increase in usable torque is outstanding, while maintaining (and consistently improving) fuel economy.

The HTV (Harrop Twin Vortices) supercharger system is a Roots-type supercharger manufactured utilising the latest Eaton TVS (Twin Vortices Series) rotating assembly. Built for a variety of engine configurations and high performance applications, the HTV Supercharger delivers more power and better fuel economy for uncompromising high performance driving. The design features patented 160 degree twist four-lobe rotors with high-flow inlet and outlet ports that greatly enhance thermal efficiency, delivering higher volumetric capacity, and enable higher operating speeds. The HTV supercharger is capable of running with a high efficiency across a very wide operating range.

With the Intercooler cores mounted internally within the manifold and a large front mounted radiator, the high efficiency Water to Air intercooler setup is guaranteed to stabilise air intake temperatures and provide consistent power delivery.
The standard kit will deliver 8psi which is recommended for factory stock engines. High boost pulleys are available for modified and rebuilt engines with forged internals.

Benefits

  • Designed to suit a wide range of engine configurations from internally standard factory engines up to extensively modified engines
  • High efficiency Water to Air Intercooler setup with internally mounted Intercooler cores
    Fits under the standard bonnet line
  • Instantaneous maximum boost anywhere in the rev range from idle to redline
  • Fitment of Supercharger in the engine “V” retains factory look and whilst giving maximum visual appeal

Parts Included

  • HTV2300 supercharger assembly using Eaton TVS rotors – 8psi
  • Supercharger inlet manifold and drive assembly
  • Twin 68mm High Flow Electronic Throttle Body
  • Intake Duct with High flow Pod Air filter
  • Air to water intercooler kit with high volume pump
  • All brackets, belts, hoses and fasteners
  • High flow 42lb injectors and fuel rails
  • All wiring loom extension and adaptor looms (no wiring modifications required)
  • Installation guide with full technical support
  • All vehicles will require custom PCM calibration after installation to avoid major engine damage
  • Full 12 month/20,000km warranty

Price

$10,995

HTV2300 Intercooled kit
including injectors

Fitting

$1,500

Intercooled Supercharger kit

Fitting

$450

High flow fuel pump upgrade
(price will depend on vehicle
configuration – e.g Sedan or
Ute)

Time

2 Days

  • Fuel pump upgrade is needed when fitting this kit (not included)
  • 2 Bar map sensor upgrade is needed when fitting this kit (not included)
  • XFlash3 flash tuner and custom tune is needed when fitting this kit (not included)
  • Ceramic coated Extractors and high flow Exhaust system is highly recommended
  • BT Brake Upgrade

$265 – Fuel pump upgrade
$199 – 2 Bar map sensor to suit 5.4 V8 engines
$1700 – XFlash3 supplied and custom tuned
$POA – Custom extractor/exhaust packages to suit Supercharged engines

Dyno Sheet

Ford 5.4 Whipple 2400 Kit

Vehicle

Ford 5.4 litre V8 (Boss Modular) Ford XR8 and FPV models – BA – FG

Overview

The heart of the system is the awesome 2.3 litre Whipple Supercharger and a unique registered design manifold that packages the supercharger and all accessories under the original intake plenum for a totally stock appearance. The BOSS Supercharger kit will substantially increase Rear wheel power by up to 110 kws on a totally standard XR8\GT with loads of low end torque.
Driven sensibly, it will yield excellent fuel economy equal to or better than factory.
The kit is professionally engineered to ISO 9001 standards and the base kit passes all ADR requirements. This is especially important for Insurance and Government transport modifications.
For those who want more, this “intercooler ready” kit can be easily upgraded to include the specially designed Water to Air Intercooler.

The Boss supercharger kit is a complete turn key package, preassembled for fast installation including a Flash Tune Box pre programmed with a base ADR tune. Expert installation is available at additional cost.

Benefits

  • ADR Approved Supercharger Kit
  • Latest Whipple Twin Screw 2.3L Supercharger
  • Intercooled and Non Intercooled Versions
  • Awesome Torque and Drivability
  • Totally Stock Appearance using factory lid and cover

Parts Included

  • Whipple 2.3 litre Supercharger
  • Supercharger inlet manifold and drive assembly
  • Air to water intercooler kit with high volume pump (Intercooled version only)
  • All brackets, belts, hoses and fasteners
  • Installation guide with full technical support

Price

$9,998

Non Intercooled
Supercharger kit

Price

$13,130

Intercooled
Supercharger kit

Fitting

$1,000

Non Intercooled
Supercharger kit

Fitting

$1,500

Non Intercooled
Supercharger kit

Fitting

$450

High flow fuel pump upgrade
(price will depend on vehicle
configuration – e.g Sedan or
Ute)

Time

2 Days

Recommendations

  • Fuel delivery system upgrade is needed when fitting this kit (not included)
  • Ceramic coated Extractors and high flow Exhaust system is highly recommended
  • 2 Bar map sensor upgrade is needed when fitting this kit
  • JBT Brake Upgrade

$265 – Fuel pump upgrade
$199 – 2 Bar map sensor to suit 5.4 V8 engines
$1700 – XFlash3 supplied and custom tuned
$POA – Custom extractor/exhaust packages to suit Supercharged engines

Dyno Sheet