This world exclusive Bullet designed kit
is perfect for the Landcruiser owner who
tows or uses their vehicle for off road
workouts. The Positive displacement
Supercharger system has been developed
with reliability being the main focus.
Small boost levels of only 5 psi allow
the engine to comfortably perform
without stressing internal components,
whilst delivering exceptional power and
The Supercharger delivers maximum boost
from “off idle” all the way to the
engine redline. This means that
instantaneous Torque is available down
low where you need it – when taking off
from a standing start with a heavy load
or caravan on the back or when in low
range on a sandy beach or in boggy mud.
Fuel Economy remains the same (if not
slightly better) on average due to the
increased torque available from the
engine, with returns of under 18 litres
per 100kms easily achievable when
towing. More power is developed down
lower in the engine rev range meaning
the engine does not have to rev as hard
to produce the same level of power. This
is most noticeable when towing up a hill
– the gearbox does not have to downshift
as often as more torque is available
through the mid range.
Maximum Torque is available lower in the
rev range – perfect for towing or four
Instantaneous maximum boost anywhere in
the rev range from idle to redline
No engine internal modifications needed
to realise Power and torque increases of
up to 50%. (75% with Bullet Ultimate Exhaust)
High efficiency Water to Air Intercooler
setup with internally mounted
Fitment of Supercharger in the engine
“V” retains factory look whilst fitting
under the standard bonnet line.
factory engine cover can be retained for
that further Stealth appearance.
Extremely quiet Supercharger – does not
increase NVH levels in the cabin whilst
Retains factory air filter element for
maximum filtration with maximum flow.
Kit can be installed using the factory
fuel injectors and fuel pump.
Upgrade available to 7psi boost level.
HTV1900 Supercharger using Eaton TVS
rotors – 5psi
High flow cast Intake manifold with
removable CNC top plate
Internal water to air
intercooler core, front mounted water
radiator, reservoir, high flow water
pump, relay and all water hoses.
High flow rear entry with CNC machined
flanges and vacuum ports.
Drive setup with new drive belt and
Filtered air intake hose with vacuum
New radiator hose and modified front
water crossover (exchange basis)
All brackets, hoses and fasteners
Step by step installation instructions
and full phone/email support
Note: This Supercharger system must be
fitted in conjunction with a tuneable
$9990 – Water to Air Intercooled Supercharger system
Freight is extra and will depend on