SPRINTEX S5 Series

Code: N/A

The Sprintex supercharger is a positive displacement, mechanically driven twin screw type compressor. Its unique, patented rotor profile design exhibits minimal internal leakage and has low parasitic losses.

The patented Sprintex rotor design, coupled with its tight internal clearances provide excellent efficiency and minimal leakage at all operating speeds resulting in superior all round performance.

The power increase on a Sprintex equipped engine is linear, with an instant throttle response and no lag. Significant torque gains are achieved at low engine speed and are maintained throughout the operating range of the engine. Sprintex superchargers are compatible with most fuels and engine cycles and application flexibility.

All prices shown exclude GST

$3,350.00$3,750.00

In Stock

Description

S5-150

  • Suitable for a standard vehicle without the need for any additional upgrades
  • No cutting or welding. Completely bolt on. Sprintex designs do not require body or frame components to be cut
  • No external oil lines to add as the compressor has its own internal oil supply
  • Optional plug and play Sprintex interceptor available
  • Estimated installation time of 3-4 hours
  • EGR equipped and Non-EGR versions available
  • Manufactured under ISO 9001 oversight
  • Sprintex system parts are warranted for 12 months or 12,000 miles
Technical Specifications
  • Displacement: 0.59 litres / 36 cubic inches per revolution
  • Maximum Theoretical Air Flow: 150 liters per second / 318 cubic feet per minute
  • Achievable Engine Power Output: 150kW / 200hp
  • Maximum Drive Speed: 16,000 RPM
  • Maximum Operating Temperature: 150C / 302F
  • Internal Compression Ratio: 1.4
  • Maximum Discharge Pressure: 2.5 Bar / 36 psi (Absolute)
  • Lubrication: Self-contained sealed unit or external oil feed
  • Weight: 5.5kg / 12.3 lbs (Approx. depending on extension & pulley fitted)

S5-210

  • OEM quality inlet manifold
  • High efficiency water to air intercooler system incorporating Laminova ® tubes optional
  • 50 State Legal, C.A.R.B. EO: D-695-2
  • Fits left and right hand drive vehicles,automatic and manual vehicles
  • Fully integrated supercharger system (not a self assemble kit)
  • No cutting or welding of standard body or frame components
  • Estimated installation time of 6 hours
  • Manufactured under ISO 9001 and TS16949 standards
  • Sprintex system parts are warranted for 12 months or 12,000 miles / 20,000 KMS
Technical Specifications
  • Displacement: 0.94 litres / 57 cubic inches per revolution
  • Maximum Theoretical Air Flow: 210 liters per second / 445 cubic feet per minute
  • Achievable Engine Power Output: 225kW / 300hp
  • Maximum Drive Speed: 15,000 RPM
  • Maximum Operating Temperature: 150C / 302F
  • Internal Compression Ratio: 1.4
  • Maximum Discharge Pressure: 2.5 Bar / 36 psi (Absolute)
  • Lubrication: Self-contained sealed unit or external oil feed
  • Weight: 10kg / 22 lbs (Approx. depending on extension & pulley fitted)

S5-335

  • S5-335 produces air flow of up to 740 cu ft/min
  • Three cycle process of intake, compression and discharge provides immediate boost and eliminating lag
  • Twin Screw linear efficiency increases volume of air forcibly inducted into the engine
  • 50 State Legal, C.A.R.B. EO: D-695-2
  • Compact and high efficiency water to air intercooler system incorporating Laminova ® tubes, increases air density for improved and more consistent performance
  • Completely bolt on and fully reversible with all components supplied pre-assembled
  • Engineered and tested to OEM specifications
  • 0 ‘ 60 mph < 5.0 seconds
  • Fully integrated supercharger system (not a self assemble kit)
  • Estimated installation time of 8 hours
  • Manufactured under ISO 9001 and TS16949 standards
  • Sprintex system parts are warranted for 12 months or 12,000 miles / 20,000 KMS
Technical Specifications
  • Displacement: 1.46 litres / 89 cubic inches per revolution
  • Maximum Theoretical Air Flow: 335 liters per second / 710 cubic feet per minute
  • Achievable Engine Power Output: 335kW / 450hp
  • Maximum Drive Speed: 14,000 RPM
  • Maximum Operating Temperature: 150C / 302F
  • Internal Compression Ratio: 1.4
  • Maximum Discharge Pressure: 2.2 Bar / 32 psi (Absolute)
  • Lubrication: Self-contained sealed unit or external oil feed
  • Weight: 12kg / 26.4 lbs (Approx. depending on extension & pulley fitted)

Additional information

Weight 15 kg
Dimensions 30-40 × 15 × 15 cm
S5 Model

S5-150, S5-210, S5-335

Reviews

There are no reviews yet.

Be the first to review “SPRINTEX S5 Series”

Your email address will not be published. Required fields are marked *