Supercharge Kit, 3.8L V6 6G75

If you’re unsure about this kit or would like some more details, please call the team on:

07 3382 0018 (Australia)
+617 3382 0018 (International)

All prices shown exclude GST

$8,490.00

In Stock

Description

Overview

Bullet Cars has the world’s first positive displacement supercharger kit to suit the 6G75 engine in the Pajero. The substantial increase in Power and Torque is due to the positive displacement Eaton M62 supercharger that gives you maximum boost from “off idle” all the way to the redline. This makes it perfect for towing or four wheel driving when you need low down torque. With just 5psi of pressure, power gains of over 45% can be safely achieved on an internally stock engine without any other modifications.

This is the only supercharger kit available for the 3.8L 6G75 V6 engine. Due the huge number of vehicles worldwide that utilise this engine, we spent countless hours designed a complete kit that is not only a breeze to install, but also thanks to the selected injectors included in the kit that are designed to work perfectly in unison with the ECU – there is no need for a tune. Just install it and enjoy the power!

Note. Some models have different alternator and power steering layouts and will need extra work.

Fuel economy remains the same (if not better) on average due to the increased torque available from the engine, with returns of around 12 litres per 100km easily achievable. More power is developed down lower in the engine rev range meaning the engine does not have to rev as hard to produce the same level of power. This is most noticeable when towing up a hill – the gearbox does not have to downshift as often as more torque is available through the mid range.

Benefits

  • Maximum Torque is available lower in the rev range – perfect for towing or four wheel driving
  • Instantaneous maximum boost anywhere in the rev range from idle to redline
  • No engine internal modifications needed to realise Power and torque increases of over 45%.
  • Kit can be installed using the factory fuel injectors and fuel pump
  • Extremely neat OEM style installation

Parts Included

  • Bullet modified M62 Supercharger with integrated intake manifold
  • Supercharger drive setup with new drive belt and idler pulley assemblies
  • Coil pack relocation on non coil over plug models
  • Throttle cable bracket
  • 6 x larger injectors
  • All other brackets, hoses and fasteners
  • Step by step installation instructions and full phone/email support

NO TUNE REQUIRED!

Additional information

Weight 30 kg
Dimensions 68 × 42 × 30 cm

Reviews

There are no reviews yet.

Be the first to review “Supercharge Kit, 3.8L V6 6G75”

Your email address will not be published.