Shop
Showing 19–27 of 117 resultsSorted by latest
-
TuningXEDE Dual Map Switch
Enables convenient switching between tune maps in the XEDE Processor.
Maps to switch for example: 98octane/95octane, Power/Economy, Regular/Towing.
-
TuningXEDE Bypass Plug
Bypasses the XEDE Processor. Can be used for diagnosis or wiring check when the XEDE is first installed.
Can also be used to return the car to stock without having to remove the XEDE wiring harness.
-
Engine ComponentsBULLET Performance Valve Springs with Titanium Retainers – Toyota FJ Cruiser 1GR-FE
When you need to transfer the exact movement of the camshaft, the highest quality valve spring is required. Bullet Performance valve springs have significantly increased seat pressure over standard, allowing cleaner combustion at high RPM in high powered engines. A must for Supercharged engines or engines with high lift cams.
- Coil Bind: .835
- Open Pressure: 160 @ .990
- Seat Pressure: 55 @ 1.390
-
Engine Components
BULLET Performance Valve Springs – Toyota V8 2UZ-FE
When you need to transfer the exact movement of the camshaft, the highest quality valve spring is required. Bullet Performance valve springs have significantly increased seat pressure over standard, allowing cleaner combustion at high RPM in high powered engines. A must for Supercharged engines or engines with high lift cams.
- Coil Bind: .835
- Open Pressure: 160 @ .990
- Seat Pressure: 55 @ 1.390
-
Sale!
Supercharger KitsBULLET Supercharger Kit – BMW 3 series M4X E36
At BULLET, we have developed our own Supercharger Kit for the BMW 4 cylinder engines found in the E30 & E36 318i/318is/318ti. These kits fit the M40 series of motors (M40, M42, M44) with serpentine belt. These are bolt on kits which include the brackets and belts. The real appeal with these kits are that you retain your air conditioning (unlike the turbo kits which require the removal of the air conditioning compressor)
The kits use the Rotrex C3084 and C3094 centrifugal supercharger. Larger Rotrex supercharger models can be used for ultra high performance or motor racing application. Some of our staff take their E36’s to the track and they are running with the Rotrex C3094P.
-
PistonsBULLET Pistons and Rods
Custom Bullet Rods and Pistons.
Rods
- High tensile 4340 forged steel
- 2 Piece forging
- Hardness of HRC36-42
- Dowelled caps for precision alignment
- X-RAY & Sonic tested
- Quenching and heat treated
- Shot peened
- 100% Magnafluxed
- Weight Matched Sets + – 1 gram
- Vacuum degassed to remove impurities.
- 200,000 psi bolts included
Pistons
- 0.5mm oversize
- 9.5:1
- Ring included
Fits
- Toyota 2UZ-FE
-
Supercharger Head Units & PartsSprintex Pulley (6 Rib)
6 Rib pulley to suit Sprintex S5 Series of Superchargers.
$225.00 Select options This product has multiple variants. The options may be chosen on the product page -
Supercharger Head Units & PartsSPRINTEX S5 Series
The Sprintex supercharger is a positive displacement, mechanically driven twin screw type compressor. Its unique, patented rotor profile design exhibits minimal internal leakage and has low parasitic losses.
The patented Sprintex rotor design, coupled with its tight internal clearances provide excellent efficiency and minimal leakage at all operating speeds resulting in superior all round performance.
The power increase on a Sprintex equipped engine is linear, with an instant throttle response and no lag. Significant torque gains are achieved at low engine speed and are maintained throughout the operating range of the engine. Sprintex superchargers are compatible with most fuels and engine cycles and application flexibility.
Price range: $3,350.00 through $3,750.00 Select options This product has multiple variants. The options may be chosen on the product page -
Supercharger Head Units & PartsROTREX Oil Cooler
A separate oil cooler is required for all applications, we offer a choice of oil coolers.
Price range: $149.00 through $249.00 Select options This product has multiple variants. The options may be chosen on the product page
