Toyota
Showing 46–54 of 55 resultsSorted by latest
-
Exhaust SystemsBULLET Ultimate Exhaust – Toyota Landcruiser 200 Series
The standard factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system in 409 stainless steel.
These exhausts have been thoroughly tested for engine light problems and utilise the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimise under hood temperature. The entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This means that there are No chassis modifications needed to fit the exhaust to the vehicle.
Increasing the exhaust size to a high flowing 3 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a wonderful V8 note under full acceleration.
A gain of between 15-20% in power and torque can be realized with the fitting of a Bullet exhaust and Bullet Engine Management Reprogramming.
-
Exhaust SystemsBULLET Ultimate Exhaust – Toyota Landcruiser 100 Series V8 2UZ-FE
The standard factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system in 409 stainless steel.
-
Exhaust SystemsBULLET Ultimate Exhaust – Toyota Landcruiser 80/105 Series 4.5L 1FZ-FE
The standard factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system in 409 Stainless steel.
These exhausts have been thoroughly tested for engine light problems and utilise the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimise under hood temperatures. Along with premium laser cut flange plates the entire system is mandrel bent utilising all the factory mounting points on the vehicle. This means that there are NO chassis modifications needed to fit the exhaust to the vehicle.Increasing the exhaust size to a high flowing 2.5 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a sportier exhaust note under full acceleration.
A gain of between 10 -15% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE Processor.
$2,590.00 Select options This product has multiple variants. The options may be chosen on the product page -
Brake PartsJBT Rotors & Calipers FT86/BRZ/FRS (Rear)
JBT Rotors and Calipers front kit. Piston, Caliper, Rotor 3550/2Pcs
Suits Subaru BR-Z, Toyota FT86, Scion FR-S.
-
Brake Parts
JBT Rotors & Calipers FT86/BRZ/FRS (Front)
JBT Rotors and Calipers front kit. Piston, Caliper, Rotor 3550/2Pcs
Suits Subaru BR-Z, Toyota FT86, Scion FR-S.
-
Supercharger KitsBULLET Supercharger Kit – Toyota 3.4L V6 5VZ-FE
Bullet Cars has the new Magnuson TVS1320 kit as an aftermarket option. The Magnuson Supercharger is the basis of this new kit with Bullet modifications to simplify installation to any 3.4 liter V6 Hilux / Prado.
The substantial increase in Power and Torque is due to the positive displacement Magnuson TVS1320 supercharger that gives you Maximum boost from off idle all the way to the redline.
-
1UZ-FE PartsBULLET Supercharger Kit – Toyota 4.0L V8 1UZ-FE
With over 20 years of Research and Development into Supercharging the 1UZ-FE V8 engine, Bullet Cars is widely known as the Industry leader in this field.
The Universal supercharger kit is specifically designed for engine swapped vehicles with the throttle body on the left side. Can be used with aftermarket Engine management ECU or factory ECU.
$6,490.00 Select options This product has multiple variants. The options may be chosen on the product page -
Supercharger KitsBULLET/Rotrex Supercharger Kit – Toyota 4.0L V6 1GR-FE
After having designed the world first positive displacement Supercharger kit back in 2005 when the 1GR-Fe engine was first released, Bullet is proud to release the first Rotrex Supercharged system for the Toyota Hilux, Tacoma and international 79 Series.
