4.0L V6 Dual VVT-i IGR-FE
Showing all 5 resultsSorted by latest
-
Supercharger KitsBULLET Supercharger Kit – Toyota 4.0L V6 DUAL VVTi 1GR-FE
Bullet Cars is proud to release another WORLD FIRST, the Rotrex Supercharger system for the current model Dual VVTi Prado and FJ Cruiser for our international customers.
-
Intercoolers & PartsIntercooler Pump (35L/min)
This high-performance 35 litre per minute, brushless, magnetically driven EBP® has drawn high acclaim globally for its diversity of applications. These intercooler pumps are what we use on all our intercooler systems some early systems had a larger Bosch pump but these can be upgraded to this includes both plugs and wiring (No Relay).
-
Fuel System PartsBULLET Hi-Flow Fuel Pump (Direct Fit)
Specifications
- 340LPH @ 3Bar (13.5V)
- 38mm Pump Diameter
- Internal Check Valve
- Direct Fit
Includes
- 90deg strainer
- Fitting kit (in-tank line, clamps)
-
TuningXEDE Processor
The XEDE is an interceptor style Engine Management System. It generates changes in fueling and ignition timing by changing the factory ECU’s load and crank reference input signals. The XEDE can also store two separate programs which can be changed at the flick of a switch while driving eg. 98 Octane or 91 Octane fuel maps.
The XEDE Processor is a sophisticated tuning tool that gives any dyno programmer control over the engine management system without having to learn the fine nuances of each vehicle’s engine management system. XMap Tuning software is available free to custom tune for accurate results.
-
Exhaust SystemsBULLET Ultimate Exhaust – Toyota Prado V6 Dual VVTi 1GR-FE
The standard factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system. These exhausts have been thoroughly tested for engine warning light problems and utilizes the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimize under hood temperature.
From the laser cut flange plates to the chrome tip, the entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This means that there are No chassis modifications needed to fit the exhaust to the vehicle.
Increasing the exhaust size to a high flowing 2 3/4 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a wonderful V6 note under full acceleration.
A gain of between 15 -20% in power and torque can be realized with the fitting of a Bullet exhaust and XEDE processor.
