Land Cruiser 100 Series
Showing 1–9 of 10 resultsSorted by latest
-
Exhaust SystemsToyota Landcruiser 100 Series V8 2UZ-FE Headers
2UZ Left & Right Hand Headers. Ceramic Coated internally and externally
The ceramic coating reduces heat transmission by 60% and therefore reduces heat in engine bay.
These are the headers we use for our 2UZ supercharger kits when supercharging the Landcruiser 100 and 200 series, and the Lexus LX470. Note these are for Right Hand Drive vehicles only.
Australian made and coated.
.
-
PistonsBULLET Pistons and Rods
Custom Bullet Rods and Pistons.
Rods
- High tensile 4340 forged steel
- 2 Piece forging
- Hardness of HRC36-42
- Dowelled caps for precision alignment
- X-RAY & Sonic tested
- Quenching and heat treated
- Shot peened
- 100% Magnafluxed
- Weight Matched Sets + – 1 gram
- Vacuum degassed to remove impurities.
- 200,000 psi bolts included
Pistons
- 0.5mm oversize
- 9.5:1
- Ring included
Fits
- Toyota 2UZ-FE
-
Intercoolers & PartsIntercooler Pump (35L/min)
This high-performance 35 litre per minute, brushless, magnetically driven EBP® has drawn high acclaim globally for its diversity of applications. These intercooler pumps are what we use on all our intercooler systems some early systems had a larger Bosch pump but these can be upgraded to this includes both plugs and wiring (No Relay).
-
Engine ComponentsBULLET Engine Components Full Engine Gasket Set to suit Toyota 2UZ-FE
Rather than duplicating OE designs, the Rebuilder’s Gasket is designed specifically for the rebuilder. They accommodate the kinds of surfaces you have to work with, and they really do the job, without leaks.
Engineers analyzed the special sealing problems of each engine covered, and designed the gaskets and seals that would work best in each part of the engine. Thermal shock dyno testing verified the design excellence. Unlike OE designs, The Rebuilder’s Gasket is designed for and works better on rebuilt engines.
Individual gaskets are die cut from the right material in the right thickness for each application, and have elastomeric sealing beads in critical areas.
-
Fuel System PartsBULLET Hi-Flow Fuel Pump (Direct Fit)
Specifications
- 340LPH @ 3Bar (13.5V)
- 38mm Pump Diameter
- Internal Check Valve
- Direct Fit
Includes
- 90deg strainer
- Fitting kit (in-tank line, clamps)
-
TuningXEDE Processor
The XEDE is an interceptor style Engine Management System. It generates changes in fueling and ignition timing by changing the factory ECU’s load and crank reference input signals. The XEDE can also store two separate programs which can be changed at the flick of a switch while driving eg. 98 Octane or 91 Octane fuel maps.
The XEDE Processor is a sophisticated tuning tool that gives any dyno programmer control over the engine management system without having to learn the fine nuances of each vehicle’s engine management system. XMap Tuning software is available free to custom tune for accurate results.
-
Exhaust SystemsBULLET Ultimate Exhaust – Toyota Landcruiser 100 Series V8 2UZ-FE
The standard factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system in 409 stainless steel.
-
Exhaust SystemsBULLET Ultimate Exhaust – Toyota Landcruiser 80/105 Series 4.5L 1FZ-FE
The standard factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system in 409 Stainless steel.
These exhausts have been thoroughly tested for engine light problems and utilise the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimise under hood temperatures. Along with premium laser cut flange plates the entire system is mandrel bent utilising all the factory mounting points on the vehicle. This means that there are NO chassis modifications needed to fit the exhaust to the vehicle.Increasing the exhaust size to a high flowing 2.5 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a sportier exhaust note under full acceleration.
A gain of between 10 -15% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE Processor.
$2,590.00 Select options This product has multiple variants. The options may be chosen on the product page
